MEGAMAT 20

NEW GENERATION OF SINGLE DRIVES WITH INTEGRATED CONTROL UNIT

Perfect for all medical applications: the MEGAMAT 20. Hospital beds, treatment tables, nursing beds and many other medical applications can be reliably adjusted using our robust single drive. The MEGAMAT 20 is particularly powerful thanks to its push force of up to 6,000 newton and pull force of up to 4,000 newton. The MEGAMAT 20 is available with an integrated BUS control unit. Using this control unit, different parameters for the system, such as stroke and speed, can be programmed individually. Thanks to the BUS system, the application-specific configurations are also integrated in the handset and can be changed simply by replacing the handset. On request, the MEGAMAT 20 is available as a retrofit version and can be connected to any of DewertOkin’s standard control units.

COMPACT AND QUIET

A compact design makes it the ideal drive for applications with limited space. The MEGAMAT 20 is also very quiet. The cost advantage and protection classification combine to make the MEGAMAT 20 the ideal single drive for use in hospitals and care facilities.

Kategória:

Customer benefits

High protection classification and cost advantage
Integrated BUS-based control unit
Outstanding configuration options
Compact and stable construction
High push and pull forces
Position detection
Low noise level

Standard configurations

Performance characteristics
Control type Analog/ Digital
Adjustment load Max. 6,000 N pushing, max. 4,000 N pulling
Adjustment speed 6 kN: 5.2 mm/s
4 kN: 8.2 mm/s
2 kN: 13.6 mm/s
Stroke length Max. 600 mm
Maximum stroke length may vary depending on the force
Fitting dimension (B) For drives without disengagement (release):
Min. 167 mm + stroke (min. installation dimension of 200 mm with 33 mm stroke)
For drives with disengagement (release):
Min. 193 mm + stroke (min. installation dimension of 226 mm with 33 mm stroke)
The minimum installation dimensions may vary depending on force and stroke. Consult with DewertOkin for your project.
Duty cycle 2/18 min. at max. 5 switching cycles per minute
Motor voltage Maintenance-free 24 V DC DC motors
Protection degree IP67 (suitability for wash tunnels is planned)
Limit shut-off Software, mechanical spindle limit stop
Stroke pipe clevis Bore hole: 10/12 mm slot: 5/8/10 mm
Gear clevis Rotatable (0° standard, 90° on request)
Hole: 10/12 mm
Slot: 5/8/10 mm
Stroke pipe Anodised aluminium, smoothly rotatable
Guiding profile Anodised aluminium
Housing colour Grey RAL 7035
Motor cables Pluggable
Position detection Optical sensor
Protection class III
Relative humidity 30% – 75%
Ambient temperatures +10 °C – +40 °C
Special configuration
Control type DCC 2.0 Powerbus
housing Motor partition cover
Version Megamat 20:
– Drive for speaker plug
– Drive with SmartSync
– Drive with Hall sensorMegamat 20i:
– DCC 2.0 Power Bus control unit built into the drive
Fuse Thermal fuse, two optical sensors, detection of run direction, overcurrent switch-off, first failure line, button enable line, pinching (entrapment) protection
Safety options Emergency release (max. 4,000 N press force, 0 kN pull force)