DUOMAT 8

VERSATILE DOUBLE DRIVE FOR NURSING AND HOSPITAL BEDS

The DUOMAT 8 is the successor of the DUOMAT 7. The double drive is equipped with SMPS and plug-in power cord. This means the device is suitable for global use. The housing not only has a modern design, but also delivers increased mechanical stability. Other advantages: The DUOMAT 8 can be easily mounted and has a high protection level. Thanks to its characteristics, the double drive is perfectly suited for combined head and back section adjustment. The adjustment load is up to max. 4,500 Newton per side. The adjustment speed is up to max. 6.5 mm/sec – depending on the drive configuration at a constant 24/29 V DC and no load.

MANY CONFIGURATION OPTIONS

The special feature of the DUOMAT 8: Its many configuration options make the drive even more efficient and versatile. The configuration options include: electrical reset function (9V battery), rechargeable battery, mains cut-off mechanism, synchronous control unit, externally-mounted floor lighting system, Hall sensor, microprocessor controlled FURNIBUS and toroidal transformer with 155 VA.

ADVANTAGES AT A GLANCE

  • Compact and stable construction
  • Integrated SMPS
  • Perfectly suited for combined head and back section adjustment
  • Easy assembly
  • High IP protection class
  • Load capacity: max. 4500 N on each side (for safety reasons, no pull force)
  • Adjustment speed: max. 6.5 mm/sec. *
  • Power unit type: SMPS
  • Integrated battery holder. Anti-plug-removal device
  • Equipment options: electrical retracting function (9 V block battery), rechargeable battery operation, mains cut-off, synchronous control unit, floor lighting system fittable from outside, Hall sensor, microprocessor control FURNIBUS, toroidal transformer 155 VA

* depending on drive configuration at constant 24/29 V DC without load

Kategória:

STANDARD CONFIGURATIONS

Performance data
Load capacity max. 4500 N on each side (for safety reasons, no pull force)
Adjustment speed 1 max. 6.5 mm/sec.
Stroke length back rest: 87 mm
leg rest: 69 mm
Fitting dimension installation length: 714 mm
component height: 119 mm
axle distance: 581 mm (+/- 3 mm)
axle diameter: 25 mm
Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute
Control unit relay control
Motor voltage maintenance-free 24 V DC motor
Components
Limit switch with micro switch
Housing colour light grey RAL 7035
Supply cable pluggable:
GB-plug, grey, spiralled, 1960 mm, PVC
GB-plug, grey, spiralled, 2460 mm, PVC
GB-plug with earthing, grey, spiralled, 1960 mm, PVC
USA-plug, grey, straight, 4000 mm, PVC
USA-plug with earthing, grey, straight, 4000 mm, PVC
AUS-plug, grey, spiralled, 1960 mm, PVC
AUS-plug with earthing, grey, spiralled, 1960 mm, PVC
JAP-plug, grey, straight, 4000 mm, PVC
JAP-plug with earthing, grey, straight, 4000 mm, PVC
earthing pin plug, grey, straight, 3000 mm, PVC
earthing pin plug, grey, spiralled, 1960 mm, PVC
contour plug, grey, spiralled, 1960 mm, PVC
SMPS yes
Further data
Connectivity 2 connections for drives 2
connections for rechargeable battery: 1
connections for operating elements: 1
connections for locking device: 1
Protection type IPX4
Protection class II
Relative humidity 30% – 75%
Ambient temperature +10°C – +40°C
Power supply wide input voltage range 100-240 V AC
Safety single-fault protected

EXTRA CONFIGURATIONS

Performance data
Fitting dimension axis diameter: 34 mm
Control unit microprocessor control „FURNIBUS”, synchronous control unit
Components
Position feedback Hall sensor
Transformer / Transformer type toroidal transformer 155 VA
Further data
Quick release / Retracting function 3 electrical retracting function (9 V block battery)
Equipment options rechargeable battery operation, floor lighting system fittable from outside
Certificate 60601-1 3rd Edition

1 depending on the drive configuration and the control components which are used

2 (example, depending on control unit type)

3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.